One removes makeup, the other washes brushes
ZM Paint Remover eco and Gaia Brush Clean & Rinse T-10s both sit in the Paint Remover category, but their listings describe different jobs. The ZM product is a plant-based remover for Dollfie makeup and body staining. The Gaia product is a water-soluble solution for washing brushes used with paint. Neither replaces the other; choosing correctly depends on whether you are cleaning a doll's surface or cleaning a tool.
The distinction matters because the Gaia listing explicitly says not to use its solution in an airbrush, while the ZM listing gives directions for cotton-puff application on a doll. Read each label before you start, and keep the two products on separate parts of your workbench so a brush-cleaning step never turns into an accidental doll cleanup.
What each listing confirms
- ZM Paint Remover eco for Dollfie 100ml: Plant-based remover gently takes off Dollfie® makeup and is described as good for removing Dollfie® (SD and DD) makeup and body staining. This is the product's stated purpose: doll surface cleanup, not brush maintenance.

ZM Paint Remover eco for Dollfie 100ml - Gaia Brush Clean & Rinse T-10s 250ml: T-10s Brush Clean and Rinse is a water-soluble solution for brush washing, not a solvent-based solution. It is formulated for cleaning paint from brushes, so it belongs in your tool-care routine rather than on a doll.

Gaia Brush Clean & Rinse T-10s 250ml
ZM Paint Remover eco: doll faceup cleanup and staining
The ZM listing gives two application methods. For removing makeup, dip a cotton puff with a proper amount of remover, apply it to the makeup, and wipe gently. For point makeup that is harder to remove, put a remover-soaked cotton puff on the area for a few minutes, then gently polish it with a brush. The listing also notes the remover is gentle on Dollfie skin and on your fingers, and that it is low-odor.
That makes it a practical choice when you are redoing a faceup or addressing body staining on an SD or DD doll. The 100ml bottle is the only size confirmed in the supplied record. The listing does not describe use on resin kit surfaces, so do not assume it is a substitute for a resin wash or a brush cleaner.
Gaia Brush Clean & Rinse T-10s: water-soluble brush washing
The Gaia listing describes a water-soluble brush wash that, with minimal agitation, lets paint peel off without damaging the brush. It recommends using the solution with G-01r Brush Wash and rubbing gently for best results. After use, always rinse with water. The listing also says the solution conditions and keeps brushes smooth, which the record frames as ideal for caring for expensive animal brushes.
Two limits are explicit: do not use the solution in an airbrush, and expect paint to peel off the brush in pieces. The 250ml bottle is the only size confirmed. If you need an airbrush cleaning method, this listing does not supply one, so treat that as an open question rather than an assumed capability.
Side by side on the decisions that matter
- Primary task: ZM Paint Remover eco: removing Dollfie makeup and body staining. Gaia Brush Clean & Rinse T-10s: washing paint from brushes.
- Formulation described: ZM: plant-based, low-odor remover. Gaia: water-soluble, not solvent-based.
- Confirmed volume: ZM: 100ml. Gaia: 250ml.
- Application method: ZM: cotton puff, wipe gently; for point makeup, leave a soaked puff for a few minutes, then polish with a brush. Gaia: use with G-01r Brush Wash, rub gently, then rinse with water.
- Stated compatibility limit: ZM: described for Dollfie (SD and DD) skin and staining. Gaia: not for use in an airbrush.
- Catalog price shown: ZM: USD 5.58 (comparison price USD 9.00). Gaia: USD 12.00 (comparison price USD 20.00).
Where the listings leave you to check the label
The supplied records do not confirm drying times, dilution ratios, or whether either product is safe on every doll or resin surface beyond what is quoted above. The ZM listing says to read the instructions on the package before using, and the Gaia listing gives a rinse step but no further after-care sequence. When a detail is not in the listing, check the package insert rather than extrapolating from another product.
For a doll faceup cleanup, start with the ZM remover and its cotton-puff method. For a brush cleaner in a resin kit workflow, use the Gaia solution as directed and keep it away from your airbrush. Keeping the two roles separate is the simplest way to avoid a costly mistake.



