How to Apply Eye Putty and Set Doll Eyes Securely
By Dollfie — VOLKS USA, INC. | Published: 2026-10-17
Category: ハウツーガイド
A step-by-step method for using eye putty to set glass or acrylic doll eyes, with checkpoints for alignment, security, and cleanup.
Quick answer
Use a small ball of eye putty behind each eye to hold it in place. Insert the eye, press the putty against the inside of the head, and adjust the eye from the front until the gaze is correct. Work one eye at a time and check symmetry before closing the head.
Why eye putty is the standard for removable eye setting
Eye putty is a reusable, pressure-sensitive adhesive that lets you reposition glass or acrylic eyes without glue. It grips the back of the eye and the inside of the head, so you can fine-tune the gaze and swap eyes later. This makes it ideal for Dollfie Dream eye installation and for anyone who changes eye colors often.
Tools and preparation before you start
Gather eye putty, a pair of glass or acrylic eyes, a clean workspace, and optional tools like tweezers or a cotton swab. Wash and dry your hands to avoid transferring oils to the putty or eye surface. If your doll has a removable head cap or face plate, open it so you can reach the eye sockets from behind.
Positioning the eyes for a natural gaze
Before securing the eyes, test the placement from the front. The iris should sit slightly above the lower eyelid line, and both eyes should look in the same direction. For glass eyes doll putty holds better on smooth surfaces, while acrylic eyes doll putty may need a slightly larger piece because acrylic can be lighter and slicker.
Working with different eye materials
Glass eyes are heavier and can shift if the putty is too soft; use a firm, fresh putty and press it firmly. Acrylic eyes are lighter and may require less putty, but check that the putty doesn’t squeeze out around the edges. In both cases, avoid getting putty on the front of the eye, as it can leave a residue.
Step-by-step eye putty application
- Prepare a small putty ball: Pinch off a piece of eye putty about the size of a pea. Roll it into a smooth ball to remove creases. Too much putty can push the eye forward or ooze out; start small and add more if needed.
- Insert the eye from the front: With the head open, push the eye through the socket from the front, holding it at the edges to avoid smudges. Check that the eye sits flush and the iris faces forward before adding putty.
- Press putty behind the eye: Reach inside the head and press the putty ball against the back of the eye and the socket wall. Flatten it slightly to create a wide contact area. The eye should feel stable but still allow minor adjustments.
- Adjust the gaze from the front: Use a cotton swab or your fingers to nudge the eye into the desired position. Check from multiple angles. If the eye won’t hold, add a little more putty or replace old putty that has lost tack.
- Secure and test: Gently tug the eye from the front to confirm it stays in place. Repeat for the second eye, matching the gaze. Both eyes should move together if you gently press on them; if not, adjust the putty amount.
Product facts
- Bunny Shorts Set: Bunny Shorts Set includes a Bunny Ear Headband, Bow Necklace, Vest, Top, Suspender Pants, Cuffs, and Tail Clip. Fits DDS (SS-S-M Bust) / DDS Boys / DD (SS-S-M Bust) / DD Boys. A complete outfit for your Dollfie Dream that lets you dress the doll after eye installation without worrying about mismatched pieces.
